Installation Guide
that the program makes another scan around the max value in 400 steps
to fine tune it.
•
If you've searched the focus manually by the slider, click on the
Automatic fine tune
button! The software will fine tune the focus
automatically.
•
This value is still not a saved configuration in the camera. You have to
press the
OK
button to finalize it.
NOTE
: If you do not save the focus value, the sensor will change back to its
default position after a while.
Setup the Iris
In case of DC or P Iris lens the system controls the Iris according to the actual
environmental light conditions.
When a manual Iris lens is used, rotate the Iris ring of the lens to find the right
position!
1. Loosen the Iris fixing screw of the lens! Rotate it counter-clockwise!
2. Rotate the Iris ring of the lens to adjust its position!
3. To close the Iris rotate the ring clockwise! To open it, counter-
clockwise is the right direction.
4.
Rotate the Iris fixing screw clockwise to tighten it and to fix the Iris
position!
NOTE
: The Iris controls the amount of the light passing through the lens. The
smaller the aperture opening, the less light can reach the camera sensor.
Moreover the Iris affects the depth of field as well. The larger the aperture
opening, the shallower the depth of field.
18/18
