Installation Guide
Installation
Installation steps
•
Remove the sensor's protective cap
•
Mount the lens
- manual IRIS
- DC IRIS
- P IRIS
•
Install the camera in a camera enclosure (optional)
•
Connect the Ethernet cable
•
Connect the Power cable
•
Connect I/O ports (optional)
•
Fix the camera on the Mounting bracket (optional)
•
Connect the camera to the LNVR
•
Setup the focus
•
Setup the IRIS (in case of manual IRIS)
Remove the protective cap and mount the lens
After unpacking the camera, remove the sensor's protective cap and mount
the lens as soon as possible to prevent sensor soiling. Standard C mount lens
types can be connected to the camera. Rotate the lens clockwise to fix it on the
camera. Connect the iris drive connector to the camera (if the lens has DC or P
iris). The connector can be found at the back of the camera. Protect the
camera and the lens from physical impact and moisture!
Install the camera into a camera enclosure
This step is optional but in case of outdoor use it is necessary. To install the
LOGIPIX camera in an enclosure, follow the steps of the enclosure's user
manual!
11/18
