Installation Guide
Configuring the analog cameras
1. Click on the
Configure
icon on the main software surface!
2. Select the Hybrid extender in the left tree to which the analog camera is
connected! Click on the '
+
' sign near the Hybrid extender! The cameras
of the device appear. Click on the '
+
' sign near the camera name and
select
Settings
!
3.
Select
Auto
at
Light options
section! Adjust
12 FPS
for
Active recording
and
0
for
play
! Set the
Resolution!
Select
720x512i
! Adjust the quality by
selecting the value 4 on the
Quality (Active)
slider!
4. Press the
Save as
button at the bottom of the window! Right click on the
created setup in the left camera tree then
Rename
it! This camera setup
will operate while the Event is open.
5. Right click on the
Settings
under the configured camera in the left tree,
and create a new
Setup
! Right click on it and
Rename
it!
55/80
