Installation Guide
have positioned one camera, create a screenshot of the camera picture and
use this for a reference when you are positioning the next camera!
Setup the focus and the Iris
On the Lobj-14 the ring closer to the front lens is the iris ring, and the other is
the focus ring.
On the Lobj-05 the ring closer to the front lens is the zoom, and the other is
the focus. The iris is controlled electronically by the camera. It is necessary, to
set the field of view of this lens.
1. Loosen the zoom ring fixing screw! Rotate it counter-clockwise.
2. Rotate the zoom ring left or right until you reach the desired field
of view. You can find the virtual view of each camera in the
previously designed digital plan. These pictures help you to find the
right and final field of view of each camera. Place clearly visible
objects on the seats / corridors, what help you to set the correct
field of view. If needed, set the focus ring as well to get a cleaner
image.
3. Rotate the zoom ring fixing screw clockwise to tighten it and fix the
zoom position.
NOTE
: The focus setup must be performed with a fully opened Iris!
In case of a Lens with manual iris:
1. Loosen the Iris fixing screw of the lens! Rotate it counter-clockwise!
2. Rotate the Iris ring of the lens counter-clockwise to fully open it!
3. Rotate the Iris fixing screw clockwise to tighten it and to fix the Iris
position!
In case of a P-iris lens
1.
Enter the camera configuration menu in the SCPlayer software
by pressing
C
2.
Locate the camera in the list on the left side of the window
3.
Find the “Logipix settings” node
12/80
