background image

20

  Safety Warnings

Important!

•  Please make this information available to the 

person responsible for installing the product.

•  Read these instructions carefully before installing 

or using this product.

•  This product is for domestic / household use only.

Installation

•  This appliance shall be installed in accordance 

with the regulations in force and only used in a 

well ventilated space. Read the instructions before 

installing or using this appliance.

•  The adjustment conditions for this product are 

stated on the data plate.

•  This product is not connected to a combustion 

products evacuation device. It shall be installed 

and connected in accordance with current 

installation regulations.

•  Particular attention shall be given to the relevant 

requirements regarding ventilation.

Caution!

•  In order to avoid hazard this unit must be installed 

according to these instructions.

•  Please follow installation information carefully. If in 

doubt consult your local building regulations, local 

gas authority standards and electrical regulations.

•  In your own interest and that of safety, it is law 

that all gas appliances be installed by competent 

persons. (Gas Safe registered installers in the 

United Kingdom) who undertake to work to safe 

standards.

•  Failure to install the product correctly could 

invalidate any warranty or liability claims.

•  This appliance must be installed in accordance 

with local regulations and standards.

•  In the United Kingdom, this hob must be installed 

in accordance with all relevant British Standards/

Codes of Practice, in particular the latest editions of 

BS5440 part 2, BS6172 and BS6891. The Gas Safety 

(Installation and Use) Regulations. The Relevant 

Building/ IEE Regulations.

Operation and Maintenance

Hot Surface Hazard

•  This appliance becomes hot during use. Do not 

touch the hob components, burners, trivets/pan 

supports or the base when hot. Before cleaning, 

turn the burners off and make sure the whole hob 

is cool and disconnect from the electrical supply. 

Failure to do so could result in burns, scalds or 

electric shocks.

Explosion Hazard

•  Do not store flammable materials such as petrol 

near the hob.

•  No combustible material or products should be 

placed on or near this product at any time.

•  Do not spray aerosols in the vicinity of this product 

while it is in operation.

•  Failure to do so may result in death or electrical 

shock.

Important Safety Precautions

•  CAUTION: This appliance is for cooking purposes 

only. It must not be used for other purposes, e.g. 

room heating.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience 

and knowledge, unless they have been given 

supervision or instruction concerning the use of 

the appliance by a person responsible for their 

safety.

•  Children should be supervised to ensure that they 

do not play with the appliance.

•  This appliance is connected to the electrical 

supply by a BS 1363 mains plug. This plug provides 

isolation from the electricity supply. 

The plug must remain accessible or be connected 

to a socket with an all-pole disconnection switch 

provided in the fixed wiring and easily accessible. 

•  Never plug this unit in using an extension lead.

•  Do not stand or place heavy objects on this 

appliance.

•  This hob is not intended to be operated by means 

of an external timer or separate remote  control 

system.

LGHOBX12_IB_120601_Annie(Check).indd   20

12年6月1日   下午5:14

Summary of Contents for LGHOBX12

























Reviews: