11
Cancelling the Alarm
1. To cancel the ALARM in standby press ALARM 1 or 2, the “ ” or “ ” indicators
will disappear in the display.
2. Press ALARM 1 or 2 again to reactivate the alarm using the previous setting.
Snooze Function
1. Press the SNOOZE/SLEEP button when the RADIO, iPod or Buzzer alarm sounds.
The snooze indicator “SNOOZE/SLEEP” will show in the display. The alarm will go
off and will then sound again in approximately 8 minutes.
Switching the Alarm Off
1. To turn off the alarm, press the STANDBY button when the RADIO, iPod
or Buzzer alarm sounds. The “ ” and/or “ ” indicators will still show in the
display and the alarm function will still be active the next day.
Sleep Timer Function
This function automatically switches the unit to standby mode after the preset time
has elapsed, allowing you to fall asleep while listening to music.
1. To activate the sleep timer function, press the SNOOZE/SLEEP button repeatedly
to select the sleep time (in minutes). It will change in the following sequence with
every press:
10
00 (OFF)
20
60
40
80
30
70
50
90
2. When the display shows your desired sleep time, release the button. The “SLEEP”
indicator will show in the display to indicate that the sleep timer function is
activated. The time begins to count down from the number of minutes selected.
3. To cancel the sleep timer function, press the SNOOZE/SLEEP button repeatedly
until “00” shows in the display. The “SLEEP” indicator will turn off in the display.
• If RADIO/iPOD is selected as the alarm mode, make sure the volume is set to a level
that can wake you up.
• If iPOD is selected as the alarm mode but your iPod is not connected to the iPod
clock radio, it will automatically switch to BUZZER for the alarm mode.
LCRLI13_IB.indd 11
23/07/2013 12:17
