14
Using Headphones / Earphones
Turn down the volume before connecting
the headphones/earphones. Slowly raise the
volume with the headphones on until you reach
your desired volume. When headphones are
connected, the speaker is automatically disabled.
For your convenience, we’ve included two
headphone sockets - allowing two users to listen
at the same time.
Ethernet Socket – Connecting to a Home Network
This socket enables you to upgrade your unit through the internet when where there is an
update available in the future. Connect this unit to a local area network (LAN) using an Ethernet
cable.
1. In STOP mode, press the SETUP button on the remote control.
2. Press the
button on the unit or press the buttons on the remote control to select
General.
3. Press the
buttons on the unit or press the buttons on the remote control to move the
highlight bar to the right.
4. Press the
buttons on the unit or press the
buttons on the remote control until you
select Software Update.
5. Press the OK button on the unit or the remote control to start update.
6. Follow the instructions on the display to finish the process.
• Maximum output voltage ≤ 150mV HEADPHONE VOLUME WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
Avoid listening to sound at excessive levels which could be harmful to your ears.
Left Side of Blu-ray Player
Headphones / Earphones
[1/8” (3.5mm) diameter plug] (Included)
L9BDVD11_IB_final110705_running change.indd 14
05/07/2011 1:43 PM
