13
Audio / Video Cable (Included)
Left Side of Blu-ray Player
Stereo Receiver /
Amplifier
To AV OUT
Sockets
Connecting an Audio Receiver
Using the supplied AV cable
The unit will down-mix Dolby Digital or DTS multi-channel audio to stereo audio for playback on
the unit’s internal speakers or for output to a connected amplifier.
Using USB port
You can connect a USB flash drive (not included) to the USB port on the unit to play picture files.
For operation of file playback on the USB flash drive, please refer to the section “Playing Picture
Files”.
• It is recommended that the unit is turned OFF before you plug in a USB flash drive.
• It does not support USB hard disk mass storage devices, multi-card readers and
other USB computer peripherals.
• It only supports USB flash drives (FAT32/16, max. capacity 32G bytes).
• Make sure your USB flash drive is FAT16/FAT32 file system. All other file systems will
not be supported.
Make sure to use the correct cable. Connecting the plugs incorrectly may cause lack
of signal, or weak signal.
Using an HDMI cable (not included)
For TVs that support it, HDMI can provide better quality audio and video output (depending
on media source), and so is the preferred connection type. Using an HDMI cable (not included),
connect the HDMI OUT socket on your unit to the HDMI IN socket on your amplifier.
AUDIO IN
L
R
White
Red
Yellow
Left Side of Blu-ray Player
Stereo Receiver /
Amplifier
HDMI Cable
(Not included)
To HDMI
Sockets
L9BDVD11_IB_final110705_running change.indd 13
05/07/2011 1:43 PM
