background image

04 //ADJUSTABLE BED FRAME - OWNER’S MANUAL

NOTICE

 

The Bed Frame is not designed for continuous operation. If the motors are overworked, the Bed 
Frame will time-out automatically for several minutes. During this time, you will not be able to 
operate  the  Bed  Frame.  Continued  excessive  use  of  the  Bed  Frame  can  damage  the  product.                                                  
•  Do not operate the Bed Frame continuously
•  If the time-out is reached, do not operate the Bed Frame for at least 6 minutes. This will re-

set the time-out

The recommended maximum load on the Bed Frame is  1000 lbs (including the mattress). Weight 
must be distributed evenly. No individual Platform is designed to support or lift this weight. Us-

ers should get in and out of bed only when the Bed Frame is in a flat (horizontal) position. Do 

not place your entire weight on the head or foot section, especially if the Bed Frame is in an el-
evated position. Do not stand on the Bed Frame or Platforms at any time. Exceeding the recom-
mended maximum load could damage the product and void the warranty.

Usage outside of the intended use described in this Owner’s Manual is only allowed with writ-
ten consent by  LOGICDATA. Improper operation or usage outside of the intended use can re-
sult in personal injury and damage to the system. Liability and warranty claims are void in 
cases of usage outside of the intended use. 

REASONABLY FORESEEABLE MISUSE

Reasonably foreseeable misuse with the Adjustable Bed Frame includes, but is not limited to:

 

Using the Bed Frame as a climbing aid

 

Jumping on the Bed Frame

 

Allowing children or animals to climb on or under the Bed Frame

 

Using the Bed Frame without a mattress or with a water-based mattress

 

Overloading the Bed Frame (max. load is 1000 lbs evenly distributed)

 

Continuous use of the Bed Frame (see below)

TARGET AUDIENCE 

This Manual is addressed to all adults responsible for assembling the Bed Frame, who:

 

Have (at least) basic technical knowledge

 

Are physically able to lift the components

 

Have fully read and understood this Owner’s Manual

Summary of Contents for SILVERlite





























Reviews: