background image

20 //ADJUSTABLE BED FRAME - OWNER’S MANUAL

LED Array

Shows the function that the Bed Frame is currently performing.

Head Platform and Foot Platform UP/DOWN Buttons

Move the Head and Foot Platforms up and down. 

Sleeping Position Button

 

Moves the Bed Frame to a flat position.

Memory Position Buttons

Move the Bed Frame to a saved Memory Position.

Child Lock Button

Enables or disables the Child Lock (when held for 3 seconds).

Wireless Sync Indicator

Blinks when Wireless Sync Mode is starting or ending.

Wireless Sync Button

Activates or deactivates Wireless Sync Mode.

6. OPERATION

REMOTE CONTROL

Each Adjustable Bed Frame is supplied with a Remote Control. Your Remote Control allows you 
to operate the Bed Frame from a distance of 23 feet (7 m). The Remote Control supplied with your 
product depends on the model you have ordered. Your Remote Control may include the following:

 

NOTE: The Remote Control supplied with your product may vary. 

NOTICE

 

Pressing too many Buttons in a short space of time can cause damage to the system.
• 

Wait one second between pressing different Buttons

CAUTION

 

Risk of minor or moderate injury to children

 

Misuse of the Remote Control by children could lead to minor or moderate injury.
•  Activate the Child Lock when children are present
•  In Wireless Sync Mode, ensure the Child Lock feature is activated on both Remote Controls
•  Do not allow children to play with the Remote Control

Summary of Contents for SILVERlite





























Reviews: