23
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
DEACTIVATING WIRELESS SYNC MODE
You only require one Remote Control to deactivate Wireless Sync Mode:
1. Press and hold the Wireless Sync Button on one Remote Control for 3 seconds
2.
The Sync Indicator will blink for five seconds
3. When the blinking stops, the Bed Frames will be in Single Mode. If either Re-
mote Control still operates both Bed Frames, repeat the procedure.
Wireless Sync Mode will remain active if the Bed Frame is unplugged and then plugged back in.
MOVING THE BED FRAME UP AND DOWN IN WIRELESS SNYC MODE
When Wireless Sync Mode is activated, pressing the UP and DOWN But-
tons on either of the Remote Controls will move both Bed Frames simul-
taneously.
FIXING MISALIGNMENT
To activate Wireless Sync Mode:
1. Press the Wireless Sync Button on both Remote Controls (on the left side
of the Remote Control) simultaneously for 3 seconds
2. Ensure that the Wireless Sync Indicator on both Remote Controls blinks for
5 seconds. When the blinking stops, the two Bed Frames have been paired
▪
If the Bed Frames do not move together, repeat the steps, making sure the Sync Indicator on
both Remote Controls is blinking.
▪
If only one Remote Control operates both Bed Frames, deactivate Wireless Sync and repeat
steps 1 and 2.
▪
If both Remote Controls are paired to the same Bed Frame, unplug the Power Converter of
the unpaired Bed Frame until the LED on the Power Converter goes out. Then, plug the Power
Converter back in. Press any Button on both Remote Controls to complete the pairing.
If two connected Bed Frames have different saved Memory Positions, pressing a Memory Po
-
sition Button will cause the Bed Frames to move to different positions. This is called Misalign
-
ment. In this case, you must move both Bed Frames to their lowest position.
1. Press the Sleeping Position Button on one Remote Control
2. Wait for both Bed Frames to reach their lowest position
3. The Bed Frames are realigned. Continue using the Bed Frame as normal.
NOTICE
Wireless Sync is designed to work with two Bed Frames. Connecting more will damage the system.
