Logic LBMULB12, Instruction & Installation Manual

Page: 18 / 24

18
Electrical Connection
Fitting Guidelines
The oven is manufactured to work with single-phase alternating
current (230V – 240V/50Hz). The connection diagram is also found
next to the cover of the connection box.
Wiring Instructions
The Earth wire coloured Green/Yellow must be connected to the
Earth terminal marked with .
The Live Wire coloured Brown must be connected to the live
terminal marked with L.
The Neutral Wire coloured Blue must be connected to the
terminal marked with N.
The connection cable must be secured in the strain-relief clamp.
Connection Diagram
• All electrical work should be carried out by a suitably
qualified and authorised electrician.
• No alterations or wilful changes in the electricity supply
should be carried out.
• The electricity supply for the oven must have an
isolation switch which enables the power to be cut off in
case an emergency and for maintenance. The distance
between the working contacts of the isolation switch
must be at least 3 mm.
• Before connecting the oven to the mains power supply
it is important to read the information on the data plate
and the connection diagram.
• Voltage of heating elements 220V – 240V.
• This product must be earthed.
• For this connection a power with a minimum
specification of H05VV-F (PVC insulated and
sheathed) 3 x 4mm
2
should be used.
Always place the wire on the side of the screw
which follows the tightening direction (clockwise).
This appliance must be earthed.
For this connection, ‘Twin and Earth 6242Y’
type cable can be used.
L
N
PE
* All images are for indication only; please refer to your individual unit for actual item.
LBMULB_X12_IB_120601_Annie.indd 18 12年6月1日 下午12:00