23
While adjusting settings, you can press and hold the CLOCK button for two (2) seconds to return
to normal mode.
Moon Phase
The display console calculates the moon phase according to your time, date, and time zone. The table
below explains the corresponding phases and their icons for both Northern and Southern hemispheres.
Please refer to the section regarding Pointing the Wireless 7-in-1 Outdoor Sensor to South for more
information on setting up your wireless weather sensor in the Southern Hemisphere.
Northern Hemisphere Icons
Southern Hemisphere Icons
Moon Phase
New Moon
Waxing Crescent Moon
First Quarter Moon
Waxing Gibbous Moon
Full Moon
Waning Gibbous Moon
Third Quarter Moon
Waning Crescent Moon
NOTE:
-In alarm mode, the “ ” icon will display on the LCD.
Alarm off
Alarm on
Alarm with ice-alert
Temp/Humidity Trend
Arrow Icon
Rising
Steady
Falling
Too cold
Comfortable
Too hot
No signal
Weak signal
Good signal
Setting the Alarm
If you’d like to use your display console as an alarm clock, follow these instructions to set the alarm
time:
1. In normal operating mode, press and hold the ALARM button for two (2) seconds until the alarm
hour starts flashing. This indicates that you have entered the alarm time setting mode.
2. Use the UP or DOWN buttons to adjust the alarm hour. Press and hold either button to move
through the hours quickly.
3. Press the ALARM button again to confirm the alarm hour and move to adjusting the minutes. The
minute digits should be flashing.
4. Use the UP or DOWN buttons to adjust the alarm minute. Press and hold either button to move
through the minutes quickly.
5. Press the ALARM button to save and exit the menu.
NOTE: Once you have an alarm set, the icon will be displayed next to the time on the LCD display.
The alarm function will be activated automatically once you set a time.
