background image

17

Select the Wind Display Mode

While in normal operating mode, press the WIND button to switch between the average wind speed 

measurement, gust wind speed measurement, and BFT measurement.

•  AVERAGE: The AVERAGE wind speed will display the average of all wind speed numbers recorded in 

the previous 12 seconds.

•  GUST: The GUST wind speed will display the highest wind speed recorded from the last reading.
•  BFT: The Beaufort scale of current wind speed will be displayed.

Set the Wind Speed Units

1. 

While in normal operating mode, press and hold the WIND button for two (2) seconds to enter the 

wind speed unit setting mode. 

2.  Press the UP or DOWN button to cycle through the wind speed units in the following order: mph > 

m/s > km/h > knots.

3. 

Press the WIND button to confirm and return to normal display mode. 

4.  Press the WIND button while in normal operating mode to enter wind direction display mode.
5.  Press the UP or DOWN button to toggle between 360 degrees or 16 direction mode.
6. 

Press WIND button again to confirm and exit settings.

The wind speed level chart on display provides a quick reference on the current wind condition.

Level

LIGHT

MODERATE

STRONG

STORM

Speed

1 ~ 12 mph

13 ~ 30 mph

31 ~ 55 mph

> 55 mph

 

Beaufort Scale

Beaufort Scale

Description

Wind Speed

Land Condition

0

Calm. Smoke rises vertically.

1

Smoke drift indicates wind direction.

Leaves and wind vanes are stationary.

2

Wind felt on exposed skin. Leaves rustle. 

Wind vanes begin to move.

Light flags extended.

3

Leaves and small twigs constantly moving, 

4

Dust and loose paper raised. Small 

branches begin to move.

5

Branches of a moderate size move.

Small trees in leaf begin to sway.

6

Large branches in motion. Whistling heard 

in overhead wires. Umbrella use becomes 

difficult. Empty plastic bins tip over.

7

Whole trees in motion. Effort needed to 

walk against the wind.

8

Some twigs broken from trees. 

Cars veer on road. Progress on foot is 

seriously impeded

9

Some branches break o

ff trees, and some 

small trees blow over. Construction /

temporary signs and barricades blow over.

Severe widespread damage to vegetation

and structures. Debris and unsecured

objects are hurled about.

10

Trees are broken o

ff or uprooted, 

structural damage likely.

11

Widespread vegetation and structural 

damage likely.

12

Calm

Light air

Light breeze

Gentle breeze

Moderate 

breeze

Fresh breeze

Strong breeze

High wind

Gale

Strong gale

Storm

Violent storm

Hurricane force

< 1 km/h

< 1 mph

< 1 knots

< 0.3 m/s

1.1 ~ 5km/h

1 ~ 3 mph

1 ~ 3 knots

0.3 ~ 1.5 m/s

6 ~ 11 km/h

4 ~ 7 mph

4 ~ 6 knots

1.6 ~ 3.3 m/s

12 ~ 19 km/h

8 ~ 12 mph

7 ~ 10 knots

3.4 ~ 5.4 m/s

20 ~ 28 km/h

13 ~ 17 mph

11 ~ 16 knots

5.5 ~ 7.9 m/s

29 ~ 38 km/h

18 ~ 24 mph

17 ~ 21 knots

8.0 ~ 10.7 m/s

39 ~ 49 km/h

25 ~ 30 mph

22 ~ 27 knots

10.8 ~ 13.8 m/s

50 ~ 61 km/h

31 ~ 38 mph

28 ~ 33 knots

13.9 ~ 17.1 m/s

62 ~ 74 km/h

39 ~ 46 mph

34 ~ 40 knots

17.2 ~ 20.7 m/s

75 ~ 88 km/h

47 ~ 54 mph

41 ~ 47 knots

20.8 ~ 24.4 m/s

89 ~ 102 km/h

55 ~ 63 mph

48 ~ 55 knots

24.5 ~ 28.4 m/s

103 ~ 117 km/h

64 ~ 73 mph

56 ~ 63 knots

28.5 ~ 32.6 m/s

 118 km/h

 74 mph

  64 knots

  32.7 m/s

Summary of Contents for LOWSC710B

































Reviews: