15
1. Rain alert indicator
2. Rainfall reading indicator
3. Reading
4. Rain rate indicator
5. Unit of measure
The SNOWY weather forecast is not based on the atmospheric pressure but based on the current
outdoor temperature reading from the wireless sensor. When the outdoor temperature is below ~
26 °F (-3 °C), the SNOWY weather indicator will be shown on the LCD display.
Select the Barometric Pressure Display Mode
Press the BARO button to select between ABS and REL mode:
• ABS is absolute atmospheric pressure of your location.
• REL is relative atmospheric pressure based on the sea.
Select the Measurement Unit for the Barometer and Set Relative Pressure Value
1. Press and hold the BARO button for two (2) seconds to enter the unit setting mode.
2. Press the UP or DOWN button to change the unit between inHg/mmHg/hPa.
3. Press the BARO button again to enter the relative pressure value setting mode.
4. Press the UP or DOWN button to change the relative pressure value.
5. Press the BARO button to save settings and go back to ABS or REL mode that you selected before.
NOTES: When powering up the console, it will display the relative pressure reading and the default
value is 1013 hPa (29.91 inHg), which refers to the average atmosphere pressure.
When you change the relative atmospheric pressure value, the weather indicators will change
along with it.
RAIN
Select the Rainfall Display Mode
The device displays how many mm or in of rain are accumulated in an hour, based on current rainfall rate.
Press the RAIN button to toggle between:
1
2
3
4
5
