SCDM-HD Series Manual V1.1
7
RF Output
– Use the Scroll Up/Down button to select RF Output. Press the OK button to enter
the RF Output menu. Menu options are Normal, Inverted and C.W. The factory default is
Normal. Use the Scroll Up/Down button to select the desired RF Output and press the OK
button to set.
Brightness
– Use the Scroll Up/Down button to select Brightness. Press the OK button to enter
the Brightness menu. Use the Scroll Up/Down button to select the desired Brightness value (0
to 255) and press the OK button to set. Factory default is 128
Contrast
– Use the Scroll Up/Down button to select Contrast. Press the OK button to enter the
Contrast menu. Use the Scroll Up/Down button to select the desired Contrast value (0 to 255)
and press the OK button to set. Factory default is 128.
Saturation
– Use the Scroll Up/Down button to select Saturation. Press the OK button to enter
the Saturation menu. Use the Scroll Up/Down button to select the desired Saturation value (0 to
255) and press the OK button to set. Factory default is 128.
Hue
– Use the Scroll Up/Down button to select Hue. Press the OK button to enter the Hue
menu. Use the Scroll Up/Down button to select the desired Hue value (0 to 255) and press the
OK button to set. Factory default is 128.
Device Address
– Use the Scroll Up/Down button to select Device Address. Press the OK
button to enter the Device Address menu. Use the Scroll Up/Down to select the Desired
Address ranging from 1 to 32 then press OK to set.
Set TS ID
. Use the Scroll Up/Down button to set TS ID. Press the OK button to enter the TS
menu. Use the Scroll Up/Down to select the TS ID ranging from 1 to 65535 then press OK to
set.
Set Region Name
. If required, use Scroll Up/Down button to set Region Name. Press the OK
button to enter the Region Name. Use the Scroll Up/Down button to select the first character of
the desired Region Name then press the OK button to set. Repeat the process until the desired
Region Name is completed. Factory Default is USA.
Note: Do not Change for USA operation.
Default Configuration
–
Caution: Once the OK button is pressed at the Default Config menu the unit will
automatically reset to the factory default.
All settings or changes to the encoder/modulator will be lost.
If you wish to set the modulator back to the factory default settings use the Scroll Up/Down
button to reach Default Configuration then press the OK button.
1 Video Input
– Use the Scroll Up/Down button to select 1 Video Input. Press the OK button to
enter the 1 Video Input menu. Use the Scroll Up/Down button to select the Video Input option:
Auto, Composite, Component, HDMI, or ASI*. The factory default is Auto. Press the OK button
to set.
The SCDM-HD series of Encoder/Modulators is designed with Intelligent Input Detection (IID)
technology. If you select Auto, the unit will detect the Active input source. You can set or fix the
input source on any of the input types available on your unit.
If the modulator has more than one video input scroll through the Advanced Menu for the
additional video input menus. (2 Video Input for Dual Unit).
