SCDM-HD Series Manual V1.1
9
option: AC3 (AC-3 Pass Through), MP2 (MPEG2 Layer I Audio), or AAC. The factory default is
MP2. Press the OK button to set. If the modulator has more than one Audio output scroll
through the Advanced Menu for the additional Audio Output menus.
1 Closed Caption
- Use the Scroll Up/Down button to 1 Closed Caption. Press the OK button to
enter the 1 Closed Caption menu. Enable / Disable 1 Closed Caption control. If the modulator
has more than one Video Output scroll through the Advanced Menu for the additional Closed
Caption menus.
To
exit the Advanced Menu
use the Scroll Up/Down button to select Exit then press the OK button.
Exit Exit Menu will appear on the LCD screen. Press the OK button twice to exit.
*** Important- Save the settings ***
Once the settings are made and the modulator is programmed (a) remove power from the unit by
disconnecting the power supply cable from the rear of the unit, (b) wait 5 seconds and (c) reconnect the
power cable. This will allow the modulator to capture the new settings.
CABLE PROVIDER SETUP
Rogers: 988-991
Allows 4 channels to be modulated. Each input must be set to a program number ranging from 1-4 and
will show on the below channels.
Output Channel: 99 MHz | Channel 96
Program Number: 1
Program 1: 988
Program 2: 989
Program 3: 990
Program 4: 991
Cogeco: 398
Output Channel: 759 MHz | Channel 118
Program Number: 398
Shaw: 716
Output Channel: 855 MHz | Channel 134
Constellation: QAM64
Program Number: 1
