LOG Monolog Square, User Manual

Page: 4 / 8

Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logaudio.com
2
MONOLOG square
User Manual
Streaming - wireless music playback
With MONOLOG square you can stream music from a variety of sources wirelessly. For this you need a wireless
connection from your audio source (smartphone, tablet, etc.) to the MONOLOG square. The built-in Bluetooth; AirPlay®
and DLNA audio-receiving components start automatically and are ready after a short while. Then connect to your
smartphone, laptop, iPod touch, or similar device as follows:
Establish Bluetooth connection
1. Activate Bluetooth in the settings of your audio source (e.g. smartphone, tablet)
2. Search for “
MONOLOG square “
3. Connect with “ MONOLOG square “ like any other Bluetooth device
4. Make sure (in the settings of your audio source) that the audio signal is played via your Bluetooth connection
5. Enjoy the music through your MONOLOG square
Note : When Bluetooth is activated once again, the device will automatically connect to the MONOLOG square as soon
as the sound system is within range.
Note: Not every device supports Blutooth apt-X. Therefore, the sound quality might differ.
Establish Apple AirPlay® connection
If your audio source supports Apple AirPlay® (for example, iPhone, iPad, iPod), you can stream your music
to MONOLOG square via AirPlay®.
1. Activate WiFi on your audio source
2. Search for the WiFi-network “
MONOLOG square “ and connect to it. The default password for the initial connection
is “logaudio“.
Note : If your MONOLOG square is already integrated in your home network (see “Integrate MONOLOG square into
your home network“), you must connect to your home network.
3. Now select “ MONOLOG square “ on the list of all available AirPlay® devices on your audio source
Note : Make sure that the audio signal is played from your AirPlay® “MONOLOG square“ device.
4. Enjoy the music through your MONOLOG square
Establish DLNA connection
If your audio source supports DLNA, you can stream your music to your MONLOG square via DLNA like to every other
DLNA speaker.
1. Activate WiFi on your audio source
2. Search for the WiFi-network “
MONOLOG “ and connect to it.
Note : If your MONLOG square is already integrated in your home network (see “Integrate MONLOG square into
your home network“), you must connect to your home network.
3. Please select on your audio source “ MONOLOG “ as target device in your streaming application.
Note: You can use e.g. BubbleUPnP® -App which can be downloaded on the Apple App Store or Google Play Store
for smartphone or tablets.
4. Enjoy the music through your MONLOG square