THETIS 7003
4
DANGER!
A warning such as this indicates the existence of a serious risk that has high probabilities to cause death or a serious accident if
appropriate precautions are not taken.
ATTENTION
!
A warning such as this indicates a reference to the application of safety practices, or draws the attention on unsafe behaviours
that might cause personal injuries or damages to the boat.
1.1 Purpose of the manual
This manual will supply information on safety and correct use of the product. Follow these warnings carefully to avoid possible
accidents or damages.
1.2 Assistance
The Lofrans products are backed throughout the world by a network of authorised distributors and assistance. In case of need,
please contact your local Lofrans distributor. Details on website www.lofrans.com
1.3 Receipt and Storage
Upon receipt of the package, verify the integrity of packing. Should it be necessary to store the product for a prolonged period,
keep it in a dry and protected place.
1.4 General notes
The THETIS 7003 chain counter must be used solely for the purposes described herein, i.e. to operate and display the number
of metres/feet of chain let out by an anchor windlass. Any other use is to be considered improper.
Any tampering with the instrument will result in immediate voiding of the warranty.
This product is in compliance with the following regulations:
1 INTRODUCTION
2.1 Specifications
2 TECHNICAL DATA
Receiver
Power supply
from 12 to 24 Vdc
No-load current intake
max 100 mA
Protection rating
-
Operative temperature
-10 : +60
Size (mm)
126 x 78 x 23
Weight (g)
80
Max output current*
2A
Transmitter
Rechargeable lithium-ion battery
Duration in continuous duty
115 minutes
Graphic display
128 x 64 pixel
Protection rating
IP 67 (Remote only)**
Operative temperature
-10 : +60
Max. chain length
999 metres – 999 feet
Size (mm)
154 x 59 x 38
Weight (g)
100
Max communication distance
at line of sight
>100m
*Outputs have short circuit protection and over current protection
**Excluding cable connection zone
Draft ETSI EN 301 489-1 V2.2.2: 2019
ETSI EN 301 489-3 V2.2.1: 2019
ETSI EN 300 220-1 V3.1.1: 2017
ETSI EN 300 220-2 V3.1.1: 2017
EN 60950-1: 2016+A11: 2009+A1: 2010+A12: 2011+A2:2013
EN 62479:2010
FCC ID:2AUL7-02419
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) .
This device may not cause harmful interference and (2) this device must accept any interference received including interference
that may cause undesired operation
