Put the oven inside the furniture and open the door.
Insert four self-threading burnished screws for wood with washer salvo-enamel edge in
four holes of diameter 9mm from the front.
Close the oven door.
1.2 ELECTRICAL CONNECTION
Connection to the electrical system must be done using the oven’s cable. Do not position
the cable on parts of the oven which get to a temperature above 50C room temperature
(top and sides); install a switch in overvoltage category III.
Use the yellow-green cable for earthing. If the cable is not long enough, replace it with a
cable at least as thick as required in the chart.
