- 66
Troubleshooting
Problem
Possible cause
Remedy
Digital Link Plus
does not work.
a) EURO-AV cable is not fully wired (pin 10 not
wired).
b) Some recorders can only adopt stations
during the initial installation of the TV set.
a) Replace the EURO-AV cable.
b) Restore the recorder to the as-delivered
state (see recorder's operating manual).
With
Teletext
various
character sets
are
displayed incorrectly.
The wrong character set has been set in the
Teletext menu.
Set the right character set: Select
Teletext
menu
→
Settings
→
Character set
→
Standard
or the appropriate character set.
No sound
via the external digital
audio
amplifier
.
a) The external digital audio amplifier does not
support the selected sound format (Dolby
Digital, dts, MPEG).
b) TV set and external digital audio amplifier are
not connected with each other.
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations on the TV
set switch to stereo in the
status display (END)
– language/sound selection (green button).
b) Connect
AUDIO DIGITAL OUT
from the TV set
to a
digital
input of the external digital audio
amplifier and select the appropriate input to
this.
The
picture
of a connected external recorder
is visible but the
t
imer
cannot be called.
The device is not registered in the
connection
wizard
or is connected differently from shown
in the
connection diagram
.
In the
connection wizard
(
TV menu
→
Connections
→
New devices/modifications
) compare the
con-
nection diagram
with the actual installation and
connect as illustrated (page 40).
The
picture
of a connected external recorder
is visible but the error message
no recorder
available
is still output.
The device is not registered in the
connection
wizard
or is connected differently from shown
in the
connection diagram
.
In the
connection wizard
(
TV menu
→
Connections
→
New devices/ modifications
) compare the
connection diagram
with the actual installation
and connect as illustrated (page 40).
Photos on the USB stick are not displayed
correctly in the PhotoViewer or a "?" appears.
The photo is not available in a displayable
format.
Convert photo file into a standard JPG format
on the PC.
