Start-up
Menu Audio
In the
AUDIO
menu you can make various sound settings.
➠
These settings are automatically imported when the HDMI
socket is used.
HDMI
SPDIF
Sampling Freq.
DRC
PCM Stereo
PCM Multi-Ch
DTS Re-Encode
Primary Pass-Thru
DISPLAY
LANGUAGE
AUDIO
LOCK
NETWORK
OTHERS
Call up the
Setup
menu.
Select option
AUDIO
.
HDMI/SPDIF
The digital audio signal, which is outputted from the
HDMI OUT
or
DIGITAL AUDIO
OUT - COAXIAL/OPTICAL
(SPDIF) socket (page 6), can be adjusted.
PCM
Stereo
Select this option if a unit with twin channel stereo
amplifier is connected to the
BluTechVision
Interactive
PCM
Multi-Ch
Select this option if a unit with digital multi-
channel decoder is connected to the
BluTechVision
Interactive
DTS
Re-Encode
Select this option if a unit with DTS decoder is
connected to the
BluTechVision Interactive
Primary
Pass-Thru
Select this option if a unit with Dolby Digital Plus,
Dolby True HD, DTS and DTS HD decoder is connected
to the
BluTechVision Interactive.
➠
If the option
HDMI
is set to
PCM Multi-Ch
, the audio may,
under certain circumstances, be outputted as PCM stereo
audio if the PCM Multi-Ch information cannot be obtained
from the HDMI unit.
Sampling Freq.
If you use the socket
DIGITAL AUDIO OUT - COAXIAL/OPTICAL
(SPDIF), you can
set the sampling frequency.
48
KHz
Select this option if your connected unit cannot
process 192 KHz or 96 KHz signals. In this selection,
your
BluTechVision Interactive
automatically
converts 192 KHz and 96 KHz signals into 48 KHz
signals.
96
KHz
Select this option if your connected unit cannot
process 192 KHz signals. In this selection, your
BluTechVision Interactive
automatically converts
192 KHz signals into 96 KHz signals.
192
KHz
Select this option if your connected unit can process
192 KHz signals.
Night Mode ( DRC)
With the setting
On
you can limit the dynamics (i.e., the difference between the
loudest and the softest sounds). You can therefore also play back a movie with
lower volume differences.
17 -