Art 40-55
User guide
english
7
6
Key M:
TV set in standby mode: switch TV set on in TV mode.
TV set switched on: call direct control on TV set.
Direct control on TV set: up
.
7
Key R:
TV set in standby mode: switch TV set on in radio mode.
TV set switched on: toggle TV mode and radio mode.
Direct control on TV set: down
.
8
Key +:
TV set in standby mode: switch TV set on in TV mode.
Increase
volume.
Direct control on TV set: to the right
.
9
Key – :
TV set in standby mode: switch TV set on in TV mode.
Reduce
volume.
Direct control on TV set: to the left
.
Preparing the remote control unit
Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batteries
together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
The position of the batteries is indicated in the battery compartment
(in opposite directions). Pay attention to the correct polarity of +
and – when inserting the batteries.
If the batteries are too weak after longer use, the TV set prompts you to
change the batteries. Dispose of used batteries in an environmentally
friendly way (see chapter
Environment / Legal information
).
Push the cover back on from below after having inserted the batteries.
Adjusting the remote control unit for operating the TV set
Press the
TV key
.
AAA
LR03
AAA
LR03
Operating controls on the TV set
Preparing the remote control unit
Functions of the operating controls
1
Mains switch:
The mains switch is located on the bottom of the set.
Always
return the TV set to Standby mode before switching it off
with the main switch.
2
On/Off key:
Switching on in standby mode
Switching off to the standby mode
3
IR receiver:
Infrared receiver for receiving the remote control commands.
4
Display:
white:
TV set in standby.
Depending on the ambient brightness, the
white LED display is dimmed
(1
and lights
up with a different degree of brightness.
If the TV set is in quick start mode, the
white LED display is not dimmable and
starts with full brightness.
white, intermittent: TV set starts.
green:
TV set switched on.
red:
timer recording active.
blue:
TV set in standby and background operation
active (EPG data updating, software
update).
5
Infrared transmitter:
When showing 3D content
(2
, the 3D glasses
Loewe Active
Glasses 3D
are controlled via the infrared sensor.
M
R
+
-
4
1
8
9
2
3
7
6
5
(1
Automatic dimming depending on the room brightness (OPC) must be activated (
System settings
ט
Picture
ט
more ...
ט
Auto dimming
).
(2
3D function available on selected models.
Summary of Contents for Art 40
Page 1: ...TV Art Art 55 Art 48 Art 40 User guide 36409003...
Page 48: ...Art 40 55 User guide english 48...
Page 49: ......
Page 50: ......
