26
Mounting the screen (Compose ...) on
the FLOOR STAND 5 MU
Now take the two screws with sleeves (page 8,
fi
g. 1, b) and the
right-angled wrench (page 8,
fi
g.1, a).
Push the sleeves into the fastening holes of the cross member,
fi
g. 25.
Push the screws into the holes in the sleeves,
fi
g. 26.
Turn the screws into the FLOOR STAND 5 MU with the right-an-
gled wrench,
fi
g. 26.
The holes in the cross member (
fi
g. 27, reference line ”a”) are
slightly bigger than the diameter of the screws. Therefore the
TV set can still be turned slightly even after the screws have not
been tightened.
This enables you to turn the TV set to line up with the SOUND
PROJECTOR.
Tighten the screws with a torque of approx. 5 Nm.
The TV set and the FLOOR STAND 5 MU are now connected
mechanically.
a
25
26
27
