43
English
Connecting other equipment - Timer recording
4. Press the
+
button, now the program
name and number flash. The VCR
programming is not stored as long as
data are flashing!
5. Store the timer data by pressing the
X
button and select the next timer
line with the blue buttons
▼ ▲
or
fade out the timer with the
TV
button.
Timer data - change, enter manually
or delete
Press the
+
button, the program name
and program number start flashing. If you
press this button several times you get the
start - stop time, date, VPS. You can make
your entry at the respective flashing
position.
Enter the date, time or program number
with the number buttons.
Set VPS to „VPS on“ or „VPS off“ with the
–
button. When you have entered all the
desired data, store these by pressing the
X
button. Select the next timer with the
blue button
▼
and enter the recording
data etc.
Entering timer data manually:
Select the blank timer with the blue arrow
buttons. The „Program no.“ position
flashes, enter the appropriate program
number. When you have entered all the
data, store them by pressing the
X
button. Shift the position for input or
correction within a timer line with
the
+
button.
Attention!
If timer recordings are programmed, the TV
set may on no account be switched off at
the on/off button
, otherwise the timer
data will be lost. If you switch your TV set
to standby with the remote control. This is
signalled by the red and green lamps on
the TV set’s local operating panel for VPS
search (approx. 1 hour before recording)
and during recording.
Note: On „VPS On“, your video recorder
will be controlled by the VPS times
transmitted by the station. If you set „VPS
Off“, the video recorder will record with the
data set in your VCR programming.
Make sure you have set the correct date
and time on your TV set! You can get the
VPS times from the program preview by
pressing the
?
button.
Broadcasts with VPS may start
earlier or later, the TV set therefore
searches for the VPS information before
the start time. If you are watching a TV
program, the TV set switches over to the
program to be recorded about 10 minutes
before recording is due to begin. The
message „Video recording“ is displayed.
It is now no longer possible to switch over
to another program unless your TV is fitted
with a satellite tuner. For example you can
watch a terrestrial program while recording
a satellite program.
Programming for recording series:
You enter the program number, start and
stop times as usual. In place of the day,
enter a number for the day of the week,
e.g. (1 = Monday - 7 = Sunday) and always
00 for the month.
Examples:
Daily series = 17.00 or
Sundays only = 77.00 or
Saturdays and Sundays only = 67.00 or
daily Monday to Friday = 15.00.
▲
▼
M
Position
+
Entry
O-9
VCR programming
X
+
–
Store
X
Program Start Stop Date VPS
-- --:-- --:-- --.--
-- --:-- --:-- --.--
O1: ARD 2O:15 21:45 28.O8 on 1
On/Off
-
Selecting the VCR programming:
MEN
➪
▼
Select „Video“
▼
Select „VCR programming“
+
Select input position
Enter data with the number buttons
VPS with button
MEN
–
select
X
store
▼
Select timer
➪
VCR programming
Program Start Stop Date VPS
O1: ARD 2O:15 21:45 28.08 on
-- --:-- --:-- --.--
O3: BR 3 21:15 22:OO 29.O8 on 2
End
Store timer data
X
TV
+
Press
