41
English
Connecting other equipment – selecting video equipment
Which audio/video equipment can you connect to the EURO-AV socket?
Call the „Video-Connect“ menu. You will get an overview of the connectable
equipment and signal types for the video connection socket (EURO-AV).
Selecting the video equipment:
Call the menu:
▼
Select „Installation“
➪
MEN
MEN
➪
▼
Select „Video“
AV1: Video/Camera
Installation
Photo CD
Laser Disk
Receiver
Decoder
RGB
Video/Camera
▼
Select the video equipment
TV
End
1. Press the
MEN
button.
2. Select the „Video“ line with the blue
button
▼
.
3. Select „Installation“ with the yellow
button
▼
.
4. Press the
MEN
button.
5. Select the video equipment with the
yellow buttons
▼ ▲
.
6. Exit the menu by pressing the
TV
button, the settings are then stored.
The signals from S-Video equipment, e.g.
SVHS video recorders or photo-CD players
are recognized automatically and the correct
signal type set for the AV connection socket
used. If an SVHS video recorder is set to
VHS mode, the CVBS signal type is set
automatically. When connecting a Photo CD
unit simply select the line "
Photo CD".
A set with RGB signals, i.e. red,
green and blue signals, can be connected
to the EURO-AV socket or a Pay-TV
decoder, e.g. for Première.
Setting AV sound:
MEN
➪
▼
Select „TV setup“
MEN
Select „Special functions“
▼
▼
Select „AV sound“
Setting AV sound
For two-sound broadcasts you can select sound 1 (main sound) or sound 2 (foreign
language) or sound 1+2 and record with a stereo video recorder. For a mono video
recorder you only set sound 1 or sound 2; on sound 1+2 both languages would be
recorded mixed.
1. Call the „TV setup - Special functions“
menu. Press the
MEN
button.
2. Select the „TV setup“ line with
▼
.
3. Select the „Special functions“ line with
▼
.
4. Press the
MEN
button.
5. Select the „AV sound“ line with
▼
.
6. You can set „ Sound 1“, „ Sound 2“ or
„Sound 1+2“ for stereo video recorder
with the buttons
+
–
.
7. End the input with
TV
.
Note:
With Sound 1+2 both sounds are
transmitted through the EURO-AV socket.
If interference occurs during a stereo
broadcast, you can switch over to „Mono“
by pressing the „Mute“
button then
pressing the „Sound functions“
button
until the Stereo line is marked in white. You
can switch to Mono with the buttons
–
+
. The Mono signal is then applied
at the EURO-AV socket.
Maximum volume 4O
Signal Cinch fixed
AV Sound 2
Special functions
+
or
Setting sound
–
TV
End
