21
Calling the „Fine tuning“ menu:
▼
Select the „Fine“ line
Fine tuning of the station:
+
The TV sets itself automatically to the best picture quality (AFC). In the unlikely event that
the picture needs to be adjusted, e.g. for the video recorder station, you can change the
station adjustment with the fine tuning.
Select „Name“ line
Program name:
▼
▲
▲
Select program name
Selecting the memory slot:
Station search and store
▲
Select „Storage“ line
▼
X
Select memory slot or enter with the
number buttons
Store End
TV
Fine tuning of the station
▲
▼
M
Channel
V/UHF O8
Frequency 196.75MHz
Storage 24
Name
TELE5
Norm Auto.-BG
AV Source ---
Fine 8
Search and store
+
–
Menu off
TV
Channel V/UHF O8
Frequency 196.25MHz
Fine
O
Name
TELE5
Norm Auto.-BG
AV Source ---
25
26
27
28
29
3O
31
32
24
Storage 24
Search and store
picture sharper picture unsharp
–
Select the „Fine“ line with the
▲
or
▼
button.
Tune to an „oversharp picture“ with the
button
+
and to an „unsharp picture“
with the
–
button. Pay attention to the
channel number when tuning, the fine tuning
may overlap the channels.
You can fine tune a stored station later.
First select the program slot. Then call the
„Station search and store“ menu. Select the
„Fine“ line and set the optimum picture.
The AFC is switched off by changing the
fine tuning!
Program name
If no name is entered under „Name“ for the set station, you can enter a name or choose
one from the name list.
Select the „Name“ line with the
▲
or
▼
button.
Carry out steps E, F and G described on
page 60 or select a name from the name
list.
1. Select the „Storage“ line with the button
MEN
or the blue buttons
▲
▼
.
2. Enter the memory slot in three digits
with the numerical buttons (04 = pro-
gram 4) or select the program slot with
the yellow buttons
▼
▲
.
3. Press the
X
button to store. All the
set program data are now stored in this
program memory. Exit the menu by
pressing the
TV
button.
Audi/Video source
Using the „Search and store“ menu, it is
also possible to select a socket and assign
a program slot for audio/video equipment.
This function is described in detail in the
chapter „Connecting other equipment“ on
page 40.
Selecting the program slot
Any program slot can be selected. It is, however, advisable to select a free program slot,
i.e. one with no program name or channel number.
