Loewe 3D Orchestra 3.1 IS, Operating Instructions Manual

Page: 21 / 116

3D Orchestra
Instruction manual
English
21
Installing the measuring microphone
Before using it, the supplied measuring microphone must be assem-
bled. First, feed the microphone cable through the pipes / couplings
and the foot. Mount these parts as shown in the sketch below.
Make sure you only hold the measuring microphone at the base
and not on the tube during transport.
2x
„
Installing the measuring microphone
Setting up / connecting the measuring microphone
Setting up the measuring microphone
Place the measuring microphone between the TV set and the opposite
wall at a distance ratio of 2/3 to 1/3 as shown in the sketch below. The
microphone marked in red must be oriented towards the TV set. The
microphone should be installed at about the level of your listening
position.
Connecting the measuring microphone
Plug the 3.5 mm jack at the cable end of the measuring microphone
into the
MIC socket on the Module 3D Orchestra Controller.
TV set
2/3
1/3
Red
labelled
microphone
2/3
1/3
MIC