Loewe 3D Orchestra 3.1 IS, Operating Instructions Manual

Page: 19 / 116

3D Orchestra
Instruction manual
English
19
Installing the Module 3D Orchestra
Controller
Mount the Module 3D Orchestra Controller, for instance, on the rear
side of the TV set. In many Loewe TV sets there is a possibility to
mount the Module 3D Orchestra Controller directly in the rear cable
duct of the TV set. This is shown as an example in the following figures.
For Loewe Individual TV sets, for instance, stick 3-4 of the self-adhesive
Velcro tapes (short) to the marked positions on the rear side of the
Module 3D Orchestra Controller.
Make sure that at least 3 to 4 short self-adhesive Velcro tapes are
used for mounting and they should not be applied to an adhesive
label (e.g. rating plate ), but on a well-adhering surface.
For Loewe Reference ID TV sets, for example, stick 2 Velcro tapes
(long) to the indicated positions (ribs) in the left-side rear cable duct
of the TV set.
Velcro tape
Press the Module 3D Orchestra Controller firmly onto the attached
Velcro tapes to fix it
Wiring of the Module 3D Orchestra Controller
.
Using the supplied LAN cable, connect the DIGITAL AUDIOLINK
socket of the Module 3D Orchestra Controller to the DIGITAL AUDIO
LINK socket of your TV set.
DIGITAL
AUDIOLINK
Module 3D Orchestra
Controller
LAN cable
„
Installing and wiring the Module 3D Orchestra Controller