Lode ERGOMETERS, Service Manual

Page: 27 / 51

Service manual Valiant treadmill V1.00 27
3.3 Replacement instruction grade motor
Required tools:
•
Allen Key #4
•
Wrench 14 mm ( 2X)
Instruction
1. Put the Valiant on its side
2. Remove the 4 Allen screws to take away the black metal plate that prevent to touch
the electronics (fig 1&2)
3. Remove the plug from the grade motor out of the power supply (fig 3)
4. Remove the bolt from the side of the motor (fig 4)
5. Remove the bolt from the side of the axle (fig 5)
6. Turn the axle clock wise till the end switch clicks (fig 6)
7. Place the adjustable feet of the treadmill in the lowest position.
8. Mount the new motor under the treadmill
9. Reassemble the treadmill in the opposite direction
10. Make sure you reconnect the power to the grade motor (fig 3)