1. Service Connector
2. Communication Interface
Module (CIM)
3. On/Off switch
4. Equipotential bonding plug
5. Safety symbols tag
6. Serial number tag
7. Motor compartment for
height adjustment and drive
8. Height adjustment (optional)
9. Walking surface (APPLIED
PART)
10. Front bar
11. Connector for external
emergency stop
12. Magnetic contact for safety
belt
5 - Validity
This manual covers all VaIiant 2 CPET versions starting with the following serial number:
938900 Valiant CPET: S/N 20140001 -
938905 Valiant CPET XL: S/N 20140001
Date of issue: June 14
6 - Install your treadmill
1. While unpacking the Lode treadmill ergometer, leave the transport straps on both ends in place.
2. Place the treadmill in the location where it will be used.
3. Remove Both transport straps and remaining packaging materials.
4. The power supply cord should be installed by authorised service personnel and instructions for
correct connection and anchoring must be ensured, securing that the requirements of clause 8.11.3 of
IEC 60601-1:2005 are met.
5. Remove all objects from the walking surface.
6. Switch on the unit with the on/off button and wait until the self-test is carried out. The product is
ready for use after you have heard a series of “beeps”.
8/21
M938900/938905_MANUAL VALIANT 2 CPET (XL) / VERSION: V1.1 - 2016-08-25
