The test subject should always wear the belt of the lanyard
safety belt.
Replacement of the power supply cord should be installed by
authorised service personnel, instructions for correct
connection and anchoring must be ensured, securing that
the requirements of clause 8.11.3 of IEC 60601 1:2005 are
met.
Set up and operate the device on a solid level surface.
The test subject should not wear loose or dangling clothing
while using the device.
Service of this device is restricted to factory trained
personnel only.
Do not jump onto the rotating belt. Do not jump off the
rotating belt (not even to the front). Do not stop moving on
the running belt. Do not turn around on the running belt. Do
not move sideways or backwards. Do not make movement
that could get you out of balance.
The test subject shall wear clothes when using the harness or
the lanyard belt to prevent skin irritation.
Replacement of parts can only be done by the manufacturer
or designated service personnel.
4/21
M938900/938905_MANUAL VALIANT 2 CPET (XL) / VERSION: V1.1 - 2016-08-25
