3. Technical Data
3.1 Energy Requirements
Power Supply: Auto Ranging
Input Voltage
90 – 265 VAC, 50/60 Hz.
Power Protection:
4A/250V fuse, 5 mm x 20 mm
Auxiliary Control Voltage:
12 volts DC
Main fuse located in power module:
5A/250V, 5mm x 20mm
3.2 Dimensions
Width
11.0 inches
Depth:
12.5 inches
Height:
7.6 inches
Weight:
19.5 inches
Light Guides (supplied separately)
Single end light guide, part 983677 – 1000mm long x 5mm diameter
Single end light guide, part 983800 – 1500mm long x 5mm diameter
Dual end light guide, part 983684 – 1000mm long x 3mm diameter
3.3 UV Output Characteristics
Initial output:
9-12 W/sq.cm (using 5mm x 1000mm light guide)*
UV Spectral Range:
250 – 400 nM
Primary Peak:
365 nM
Secondary Peaks:
315, 335 nM
*Exact output measurement is dependent on the brand and calibration method of the meter used.
4. Installation
4.1 Space Requirements
A space of 12" wide x 16" deep x 8" height is required. It is important to have at least 8
inches of space behind the unit to insure proper airflow. The Loctite
®
ZETA
®
7740 UV
Wand System only needs to be connected to a 120V/60Hz outlet to operate
.
Caution!
Do not block the intake and exhaust fans located on the back of the housing.
Caution!
The unit should always be operated with the rubber support feet resting on a flat surface.
Caution!
Do not operate with the unit resting on its side or at an angle greater than 15 degrees,
front to back
.
