2. Description
(continued)
2.2
Operating Elements and Connections, refers to Figure 1
1 Power Inlet Module
Connect line cord to power inlet module.
2 Power Fuse Holder
Fuse is located in the power module.
3 Power Switch
4 Foot Switch Connection
Standard 9 pin “D” connector for foot switch or other external switch.
5 Light Guide Receptacle
Is used to retain the light guide.
6 Power Indicator
When illuminated the unit is “ON.”
7 Display
Displays the exposure time, lamp hours, and the mode.
Exposure Time
Indicates the time of the UV exposure per cycle. In manual mode, the time that
the shutter has been kept open by depressing the footswitch is shown. In timed
mode, the pre-set exposure time is shown.
Lamp Hours
The hour meter indicates the cumulative time that the lamp has been ON.
Mode
“M” indicates manual mode and “T” indicates timed mode.
Time Set Buttons
These buttons re sued in the timed mode to set the exposure time per cycle.
8 Mode Selector – Manual/Timed
When set to “manual” the UV light is passed through the light guide for as long as the
foot switch is depressed. In the “timed” mode, the timer’s LCD display indicates
exposure time and the cycle is initiated when the foot switch is momentarily
depressed.
9
Hour Meter Reset Button
Resets the hour meter to “0” when the button is depressed.
Notice:
This should only be done when a new lamp is installed.
10 Time Set Buttons
Sets curing time duration.
