background image

9

9

Warranty

Loctite expressly warrants that all products referred to in this Instruction Manual for the ZETA

®

7401 UV Curing Flood System (hereafter called “Products”) shall be free from defects in
materials and workmanship. Liability for Loctite shall be limited, as its option, to replacing those
Products which are shown to be defective in either materials or workmanship or to credit the
purchaser the amount of the purchase price thereof (plus freight and insurance charges paid
therefor by the user). The purchaser’s sole and exclusive remedy for breach of warranty shall be
such replacement or credit.

A claim of defect in materials or workmanship in any Products shall be allowed only when it is
submitted in writing within one month after discovery of the defect or after the time the defect
should reasonably have been discovered and in any event, within 12 months after the delivery
of the Products to the purchaser. This warranty does not apply to perishable items, such as
fuses etc. No such claim shall be allowed in respect of products which have been neglected or
improperly stored, transported, handled, installed, connected, operated, used or maintained. 
In the event of unauthorized modification of the Products including, where products, parts or
attachments for use in connection with the Products are available from Loctite, the use of
products, parts or attachments which are not manufactured by Loctite, no claim shall 
be allowed.

No Products shall be returned to Loctite for any reason without prior written approval from
Loctite. Products shall be returned freight prepaid, in accordance with instructions from Loctite.

NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED,
MISUSED, NEGLECTED, OR DAMAGED BY ACCIDENT, OR IF THE SYSTEM USED TO
DISPENSE ANY LIQUID MATERIAL OTHER THAN LOCTITE PRODUCTS. 

EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, LOCTITE
MAKES NO WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH
RESPECT TO THE PRODUCTS.

ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
OTHER WARRANTIES OF WHATEVER KIND (INCLUDING AGAINST PATENT OR
TRADEMARK INFRINGEMENT) ARE HEREBY DISCLAIMED BY LOCTITE AND WAIVED BY
THE PURCHASER.

THIS SECTION SETS FORTH EXCLUSIVELY ALL OF LIABILITY FOR LOCTITE TO THE
PURCHASER IN CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF DEFECTIVE
PRODUCTS.

WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE
UNDER APPLICABLE LAWS, LOCTITE EXPRESSLY DISCLAIMS ANY LIABILITY
WHATSOEVER FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY IN
CONNECTION WITH THE SALE OR USE OF, OR OTHERWISE IN CONNECTION WITH, THE
PRODUCTS, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS AND SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER CAUSED BY NEGLIGENCE FROM
LOCTITE OR OTHERWISE.

Summary of Contents for ZETA 7401













Reviews: