1.1
Emphasized Sections
WARNING!
Refers to safety regulations and required safety measures that protect the operator or other
persons from injury or danger to life.
Caution!
Emphasizes what must be done or avoided so that the unit or other property is not damaged.
Notice:
Gives recommendations for better handling of the unit during operation or adjustment as well as
for service activities.
1.2
For Your Safety
IMPORTANT! DO NOT OPERATE THE UNIT BEFORE READING THIS SECTION.
The Loctite
®
ZETA
®
7401 UV cure system is a source of long wavelength ultraviolet light used to
cure light sensitive products. The system incorporates UV shielding and a non-reflective work
surface. It is safe when installed and used properly. The following guidelines should be followed
at all times to ensure protection from the ultraviolet light.
1. UV protective glasses with side shields should be worn when working with and around the
lamp system. Glasses should meet ANSI Z87.1 certification.
2. Potentially exposed skin should be covered. Long sleeves and protective gloves should be
worn when placing and removing parts from under the lamp.
3. Never look directly at the output from the lamp or directly into the lamp/reflector.
4. Do not operate the ZETA
®
7401 without cover in place and secured properly.
UV safety is the responsibility of the user, especially when operating the model ZETA
®
7401 in a
non-standard configuration. When in doubt about UV safety, consult a Loctite technical specialist
at 1-800-LOCTITE (562-8483).
1.3
List of Parts Supplied
• UV Chamber
• Power Cord
• UV Protective Eye wear
• Cotton Gloves
• Operators Manual
• Reusable Shipping Box and Foam Packaging
1
1
Please observe the following
☞
