background image

 

    Contents 

1   

Please observe the following ......................................................................................4 

1.1   

Emphasized Sections.....................................................................................................4 

1.2   

Items Supplied................................................................................................................4 

1.3   

For Your Safety ..............................................................................................................5 

1.4   

Field of Application (Intended Usage) ............................................................................5 

2   

Description....................................................................................................................6 

2.1   

Theory of Operation .......................................................................................................6 

2.2   

Operating Elements and Connections............................................................................6 

3   

Technical Data ..............................................................................................................7 

4   

Installation ....................................................................................................................8 

4.1   

Connecting to the Product Reservoir .............................................................................8 

4.2   

Connecting to the Controller...........................................................................................8 

4.3   

Selection of the Required Dispensing Needle..............................................................10 

5   

Dispensing ..................................................................................................................11 

5.1   

Flushing........................................................................................................................11 

5.2   

Adjusting the Dispensing Quantity ...............................................................................12 

5.3   

Shutdown .....................................................................................................................12 

5.4   

Returning to Operation .................................................................................................12 

6   

Maintenance................................................................................................................13 

7   

Troubleshooting .........................................................................................................14 

8   

Annex ..........................................................................................................................15 

8.1   

Accessories and Spare Parts .......................................................................................15 

8.2   

Manufacturer’s Declaration ..........................................................................................16 

8.3   

Warranty (excluding Germany) ....................................................................................16 

Summary of Contents for VoluDrop UV 97650



















Reviews: