39
6 Care and Maintenance
6.1 Care
●
Occasionally the o-ring at the syringe adapter
12
should be lubricated with the
enclosed silicone grease. This will prolong the life.
☞
Note!
Clean hands after application of grease to assure surfaces to be bonded are clean.
Otherwise a fusion might fail.
●
Clean adhesive residue from the pencil holder
18
or replace it with a new one as
required.
Warning!
If cleaning agents are not properly handled, damage to health can result!
Observe general safety regulations for the handling of chemicals!
Observe manufacturer’s instructions! Request a safety data sheet for the product used!
Recommended cleaning agents for:
– Anaerobic and UV curing adhesives and chip bonder:
Cured adhesives cannot be removed with the solvents that are permitted to be used
now.
Fluid adhesive residues can be removed with various solvents.
Well suited is ACETON.
– Cyanoacrylate adhesives:
The best solvent is ACETON.
Supply sources for solvents:
– ACETON Local specialist dealers
6.2 Maintenance
The unit requires no special maintenance.
