Operating Manual
- Page 18 -
4.5Navigation Menu
Once the menu is open, use the up and down arrows to move through the items on
the menu.
Use left and right arrows to change to the next page or previous page of the menu.
Press
ENTER
to select the current item.
4.6Jogging
The tip is jogged by pressing the jog buttons.
If the
FAST
button is pressed and held first, then one of the jog
buttons is pressed, the axis will be jogged at the maximum jog
speed.
If one of the jog buttons is pressed first, then the
FAST
button
is pressed, the jog motion will accelerate.
If the
FAST
button is released, the jog motion will decelerate.
4.7Data Entry
If a numeric value is required, the teach pendant will automatically switch to numeric mode. Use
the keys 0 –9, (.) and the minus sign (-) to enter numbers.
4.8Running a Program
Press the
key to run the program.
Summary of Contents for 1670898
