SECTION 3.6 3.7
15
3.6 Adding a Fingerprint (Continued)
Scan your finger by lightly placing your designated
finger on the sensor until you hear a beep. Lift your
finger and repeat the process slowly until the digit
“6”
shown on the screen becomes
“1”.
If you have
successfully scanned and registered your fingerprint,
you will hear a long beep, and the Bluetooth icon will
flash green.
PASS
will show on the keypad and press
OK
to exit. If
you did not successfully register your fingerprint,
FAIL
will show on the keypad. If
FAIL
is displayed, press
OK
to return to the previous screen to rescan your finger.
For instructions on scanning an optimal fingerprint,
please proceed to
Section 3.7.
OK Button
The
fingerprint sensor
equipped in Lockly
Guard is loaded with powerful fingerprint
algorithms to extract quality features from
fingers, even in poor conditions. Placing
your finger on the sensor correctly helps
consistency in fingerprint recognition. The
following directions and tips will guide
you on how to scan an optimal finger-
print image.
3.7 Fingerprint Scanning Directions
Position your finger on the
center
of the sensor
Sensor
Core