Lochinvar LOKE8-100, Installation, Commissioning, Maintenance And User Instructions, Page: 18 / 28

18
10.0 ELECTRICAL SUPPLY
Wiring external to the equipment must be installed in accordance with the I.E.E. Regulations and any local regulations that
apply.
ELECTRICAL SUPPLY REQUIREMENTS
Warning: this appliance must be earthed
A suitably competent person must check wiring. Normal supply required is 230 volts’ AC, single phase,
50hz. An isolator with a contact separation of at least 3mm in all poles should be sited close to the
equipment and must only serve that equipment. The double pole switch must be readily accessible
under all conditions
The controller fitted to the three-port valve simply plugs into a standard UK plug socket, alternatively the plug can be removed, and
the controller hard wired into a junction box.
EXTERNAL CONTROLS
There are no external control options with the LOKE unit, if a unit is required with BMS control options a standard LOK unit should
be used, contact Lochinvar Internal sales for more information.