26
“Normal Operation All Day” - “Economy Mode All Day” and “Normal
Operation Between.” Only one Operating Mode can be active, the
factory default is Normal Operation All Day.
Normal operation All day:
When this operating mode is active the
normal Operating Set Point is used for the entire day.
Economy Mode All day:
When this operating mode is active the
Economy Set Point is used for the entire day.
Normal operation Between:
When this operating mode is active
there will also be start and stop times to program. The normal
Operating Set Point is used between the programmed start and stop
times and the Economy Set Point will be in effect during the rest of
the day. There is one start time and one stop time event per day.
EConoMy ModE sEttInGs
setpoint Adjustment Value
ACtIon
dIsPLAy
From the Desktop Screen, press the Operational Button underneath “MENU”
to enter the Main Menu.
Notice how the text above the Operational Buttons on the display changes
as you navigate through the various menus and screens.
Use the Up/Down buttons to select (highlight in black) the Economy Mode
Setup menu from the Main Menu. Press the Operational Button underneath
“SELECT” to enter the Economy Mode Setup menu.
Use the Up/Down buttons to select (highlight in black) Setpoint Adjustment.
Press the Operational Button underneath “CHANGE” to activate the
adjustment mode for the Setpoint Adjustment value.
Use the Up/Down buttons to change the Setpoint Adjustment to the desired
value. The Setpoint Adjustment value is adjustable from 2°F to 50°F. The
factory default is 20°F.
Notice how the text above the Operational Buttons on the display changes
to “UPDATE” & “CANCEL” when the adjustment mode is activated and how
the current value is outlined rather than highlighted in black.
Press the Operational Button underneath “UPDATE” to enter and confirm
the new value. Pressing the Operational Button underneath “CANCEL”
would discard the new value and retain the previous value.
The new Setpoint Adjustment value should now be displayed as the
current value.
Summary of Contents for HC 119 Series 100
