background image

      

Dual Fuel Supplemental Manual

Please read before proceeding

Installer – 

Read all instructions, including 

this manual, the Crest Installation and 
Operation Manual and the Crest Service 
Manual, before installing.  Perform steps 
in the order given.

User – 

This manual is for use only 

by a qualified heating installer/
service technician.  Refer to the User’s 
Information Manual for your reference.

Have this boiler serviced/inspected by 
a qualified service technician, at least 
annually.

Failure to comply with the above could 
result in severe personal injury, death or 
substantial property damage.

Failure to adhere to the guidelines on this 
page can result in severe personal injury, 
death, or substantial property damage.

When servicing boiler –

• To avoid electric shock, disconnect electrical supply 
  before performing maintenance.

• To avoid severe burns, allow boiler to cool before 
 performing 

maintenance.

Boiler operation –

• Do not block flow of combustion or ventilation air to 
 the boiler.

• Should overheating occur or gas supply fail to shut off, 
  do not turn off or disconnect electrical supply to 
  circulator.  Instead, shut off the gas supply at a location 
  external to the appliance.

• Do not use this boiler if any part has been under water.  
  The possible damage to a flooded appliance can be 
  extensive and present numerous safety hazards.  Any 
  appliance that has been under water must be replaced.

When calling or writing about the boiler 
– Please have the boiler model and serial 
number from the boiler rating plate.

Consider piping and installation when 
determining boiler location.

Any claims for damage or shortage in 
shipment must be filed immediately 
against the transportation company by 
the consignee.

Factory warranty (shipped with unit) does 
not apply to units improperly installed or 
improperly operated.

3

If the information in this manual is not 
followed exactly, a fire or explosion may 
result causing property damage, personal 
injury or loss of life.

This appliance MUST NOT be installed in 
any location where gasoline or flammable 
vapors are likely to be present.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electric switch; do 
  not use any phone in your building.
• Immediately call your gas supplier 
  from a near by phone.  Follow the 
  gas supplier’s instructions.
• If you cannot reach your gas supplier, 
  call the fire department.
• 

Installation and service must be 

 performed by a qualified installer, 
  service agency, or the gas supplier.

 WARNING

 NOTICE

 WARNING

 WARNING

 

Summary of Contents for Crest 1251

















Reviews: