Instruction manual CHA
25
is
3.9
Flue gas discharge
Warning
The installation should be carried out by a competent person, in compliance
with general and locally applicable regulations
(1.3 "Regulations")
.
Fit a vertical chimney pipe (2) of at least 0.5 metres length to the opening of the
draft diverter, before fitting the rest of the chimney materials according to current
regulations
(1.3 "Regulations")
.
Installing the draught diverter
Comment
Use flue gas discharge materials that comply with the
regulations
(1.3 "Regulations")
.
Comment
Make sure that the chimney discharges into an area approved for this type
of appliance.
Legend
1
draught diverter
2
flue gas discharge
>0,5m
_
IMD-0148 R2
2
1
Summary of Contents for CHA 100 CE
