background image

                

User’s Information Manual

4

Please read before proceeding

 WARNING

To minimize the possibility of serious 
personal injury, fire, or damage to your 
appliance, never violate the following safety 
rules:

1.  Boilers are heat producing appliances.  To 
 

avoid damage or injury, do not store 

 

materials against the appliance or the 

 

vent-air intake system.  Use proper care 

 

to avoid unnecessary contact (especially 

 

children) with the appliance and vent-air 

 intake 

components.

2. Never cover your appliance, lean 
 

anything against it, store trash or debris 

 

near it, stand on it or in any way block 

 

the flow of fresh air to your appliance.

3. UNDER NO CIRCUMSTANCES must 
 

flammable materials such as gasoline or 

 

paint thinner be used or stored in the 

 

vicinity of this appliance, vent-air intake 

 

system or any location from which fumes 

 

could reach the appliance or vent-air 

 intake 

system.

Codes –

The equipment shall be installed in accordance with those 
installation regulations in force in the local area where the 
installation is to be made.  These regulations shall be carefully 
followed in all cases.  Authorities having jurisdiction shall be 
consulted before installations are made.  In the absence of 
such requirements, the installation shall conform to the latest 
edition of the National Fuel Gas Code, ANSI Z223.1.  Where 
required by the authority having jurisdiction, the installation 
must conform to American Society of Mechanical Engineers 
Safety Code for Controls and Safety Devices for Automatically 
Fired Boilers, ASME CSD-1.  All boilers conform to the latest 
edition of the ASME Boiler and Pressure Vessel Code, Section 
IV.  Where required by the authority having jurisdiction, the 
installation must comply with the Canadian Association Code, 
CAN/CGA-B149.1 and/or B149.2 and/or local codes.

This appliance meets the safe lighting performance criteria with 
the gas manifold and control assembly provided as specified in 
the ANSI standards for gas-fired appliances, ANSI Z21.13 and 
ANSI Z21.10.3.

Summary of Contents for 000 BTU/HR













Reviews: