CONTROL PANEL: ELITE TWO
A
.
Power Switch
– Powers the machine on and off.
B
.
Elevation
– Adjusts the ball the ball trajectory up and down.
C
.
Vertical Switch
– Turns on and off the random vertical oscillation.
D
.
Horizontal Switch
– Turns on and off the random horizontal oscillation.
E
.
Remote Switch
– Activates the remote control.
(
If you did not purchase a remote, this
switch is not active until you upgrade your machine from your dealer or
direct from the factory.)
G
.
Reset Button
– Pops out in event of malfunction. If this happens, turn off the
machine; push the reset button back in, and power up machine.
Please refer to the Troubleshooting section (page 11) or contact
Customer Service if the issue persists.
H
.
Feed On LED
– LED will light up when the feed motor begins to turn.
I
.
Feed Knob
– Adjusts ball feed interval between 2-12 seconds. Turn completely
counter-clockwise to turn off the feed.
J
.
Speed Knob
– Adjusts the speed from 10-80 mph.
K
.
Spin Knob
– Controls amount of underspin and topspin on the ball.
L
.
Status Indicator
– LED lights indicate battery level ONLY when machine is
powered on. When the machine is charging, refer to the LED
light on the charger. Leave machine off when charging.
M
.
Charger Port
– Located on the red base. Slide the black cover in either direction to
expose the jack.
A
B
C
D
G
H
I
J
L
F
K
M
