In the US, if you have questions about your machine, please DO NOT
contact your dealer; email [email protected] or call
TROUBLESHOOTING
Machine Errors
The electronics are programmed to help diagnose a machine error. The LED
indicator will flash in the patterns listed below. If the error message continues
to flash after trying the below fixes, call Lobster Customer Service at 800.526.4041
or email [email protected] for assistance.
Additional troubleshooting information and help videos can be found on our website’s
section. Please visit
CLEANING & STORAGE INSTRUCTIONS
Cleaning the Machine
Always turn the power OFF when cleaning the machine. The outside of the machine
may be wiped down with a mild detergent. The inside of the machine may be
vacuumed to remove dirt and debris (i.e. leaves, sand particles, dirt, etc.) To help
keep the inside of machine clean, remove all small debris from the balls before
refilling the hopper.
Storing the Machine
Always store the machine indoors in a clean, dry location. Exposure to rain and snow
will damage the electronics. Never store the machine in a closed vehicle—which can
reach 180°—as excessive heat can negatively affect the machine’s electronics and
battery. We recommend the
to protect machine.
Storage Cover
protects your ball machine from the
elements, as well as from dust and moisture when in storage.
2 flashes, pause,
2 flashes, pause
3 flashes, pause,
3 flashes, pause
4 flashes, pause,
4 flashes, pause
5 flashes, pause,
5 flashes, pause
LED INDICATORS
MACHINE ERROR
Feed motor error -
If the feed wheel jams, turn machine off, remove
jammed ball, and turn the machine back on.
Top serve motor error -
Turn machine off, check for jammed balls,
remove case, remove jammed ball, close case and turn machine on.
Bottom serve motor error -
Turn machine off, check for jammed balls,
remove case, and remove jammed ball, close case and turn machine on.
Sweep motor error -
Turn machine off, check for any impediment to
ability to sweep, remove it, and turn machine on.
