OPERATING INSTRUCTIONS
2-Line Oscillation Setup
(Available with elite three ONLY)
The 2-line function automatically throws to two preset locations allowing you to
practice alternating forehand and backhand shots. You may choose 2-line narrow
or wide for added versatility.
NOTE
: The ball hopper MUST have balls in it for the
two-line oscillation feature to work.
• Fill the hopper, then turn the POWER switch ON.
• Set SPEED knob to desired speed.
• Turn HORIZONTAL SWEEP switch ON.
• Turn the 2-LINE switch to ON.
• For an 4-second interval per ball, set the FEED from 2-8 seconds.
• For an 8-second interval per ball, set the FEED from 10-12 seconds.
REMOTE CONTROL INSTRUCTIONS
Elite Remote
(optional)
• Power on your machine by pressing the POWER switch on the
control panel.
• Press the REMOTE switch located on the control panel to ON
to activate the remote.
• Turn the ball FEED dial to select a 2-10 second feed rate.
• From the opposite side of the court, press the buttons on the
handheld remote to turn on/off the feed and/or sweep.
Elite10 Remote
(optional: for elite two and elite three)
• Power on your machine by pressing the POWER switch on
the control panel.
• Press the REMOTE switch located on the control panel to
ON to activate the remote.
• Turn the ball FEED dial to select a 2-10 second feed rate.
• From the opposite side of the court, press the black FEED
on/off button on the handheld elite10 remote to begin play.
REMINDER
:
The switches and dials on the control panel will always override
the remote control.
