TROUBLESHOOTING
Machine Doesn’t Power On
Ensure the Main Power switch is ON. Ensure the battery is charged. If both of
these things are fine, the battery wires may have become disconnected or loosened.
To check the wires:
• Make sure the MAIN POWER switch on the machine is in the off position and
ensure there are no balls in the machine.
• Undo the four screws on the control panel and gently pull back. (Be careful
not to touch the electronic board directly)
• Follow the red and black wires from the battery terminals to the control board.
If they are loose, reconnect.
Machine Error
The electronics are programmed to help the user diagnose his/her machine.
Error messages will appear on the LCD screen when the machine is turned on.
If there is no obvious problem, turn the machine off and back on again to check
error message. Troubleshooting information and help videos can be found on our
website’s support section. Please visit
. If the error
message continues, call Lobster Customer Service at 800.526.4041 or email
[email protected] for assistance.
CLEANING & STORAGE INSTRUCTIONS
Cleaning the Machine
Always turn the power OFF when cleaning the machine. The outside of the machine
may be wiped down with a mild detergent. The inside of the machine may be
vacuumed to remove dirt and debris (i.e. leaves, sand particles, dirt, etc.) To help
keep the inside the machine clean, remove all small debris from the balls before
refilling the hopper.
Storing the Machine
If you plan to not use your machine for one month or longer, we recommend that you
turn the Main Power Switch off. Always store the machine indoors in a clean, dry
location. Exposure to rain and snow will damage the electronics. Never store the
machine in a closed vehicle—which can reach 180°—as excessive heat can negatively
affect the machine’s electronics and battery. We recommend the
to protect machine from dust and moisture.