Remove recessed cross head countersunk screws fi xing the pickup plate.
䠍
ᾂ
䠍
ᾁ
䠍
ᾀ
䕻㻌㻌
Replacement of pickup plate
㻖㻌
When connecting or disconnecting the air hose or cable, use caution to prevent damage
to the air hose or cable.
㻖㻌㻌
Do not loosen screws other than those specifi ed. Otherwise, it may cause malfunction.
Pickup plate
Pull up the screw section
䠍䠑
Hex socket bolt
Brush cylinder unit
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
䐠
Loosen the hexagon socket head cap bolts from 4 locations on right and left
sides (2 on each side) with a hexagonal key wrench (3 mm opposite fl ats).
Pull the pickup plate upward to remove it.
(At this time, attach an M6 bolt as shown below for easier removal.)
䐡
Remove the brush cylinder unit.
䐟
Remove the front urethane cover. (Refer to step
䐠
of instruction on page 9.)
䠍
ᾀ
